| |
| |
|
|
|
Solid Vinyl Swiss: It took the ancient weapon of the pike in the hands of the Swiss to punctuate what Cour-trai and Crecy had foreshadowed. Unable to afford horses and armor, the Swiss fell back on discipline and the Solid Vinyl Swiss mass formation of a new phalanx. While other nations copied the Swiss, the Spanish introduced a new version of the phalanx in the square, 2,500 men in 50 ranks and 50 files. They supplemented the Swiss pike with sword and musket (the harquebus), the latter being employed at the corners of the square so that the harquebusier might retire to the rear to perform the laborious task of reloading.
Cushions, seat covers, and curtains made of vinyl, as well as vinyl tops and cockpit covers, can be renewed with liquid vinyl coatings available in many colors.See Also Solid Vinyl Ains:Solid Vinyl ains Resin Plastics.—Resins prepared by the copolymerization of Solid Vinyl ains chloride and Solid Vinyl ains acetate were first made in the United States in 1928. This type of resin is used in phonograph records, coatings for concrete and metals, can linings, adhesives, and electrical insulation. Resins made from Solid Vinyl ains chloride are also employed for the manufacture of wire and cable coverings, coated fabrics, garden hose, pipe, and Solid Vinyl ains film and sheeting. The principal outlets for film (10 mils or less in thickness) are aprons, draperies, garment bags, Table covers, rainwear, air-inflatable items, and food packaging; for sheeting, hand¬bags, upholstery, luggage, shoes, bookbinding, and belts.
Your boatyard can probably recommend the proper paints and tell you which brands work best. Solid Vinyl ains-based paints are usually sat¬isfactory. Prepare previously unpainted aluminum by washing with an etching cleaner. Then rinse and let dry before applying a Solid Vinyl ains-based primer.
Before applying antifouling bottom paint, start with a Solid Vinyl ains primer-undercoat. For aluminum hulls, use paints specifically rec¬ommended for such applications.
On The Other Hand See Solid Vinyl Crossflow:Membrane filters are classified according to whether they are operated in a dead-end mode or in a crossflow mode; crossflow filters are then differentiated according to the pore size in the membrane or according to the size of contaminant they will remove from the process stream. In crossflow (or low shear) filters the Filter surface is stationary, and these are distinguished from dynamic (or high shear) devices which usually contain a moving Filter surface.
High shear crossflow filters offer many of the advantages of low shear filters, but with the potential benefit of higher fluxes. A typical unit comprises a cylindrical pressure vessel enclosing up to 12 Filter leaves of —0.5 m diameter (see Figure 7.38). The preferred type, which is typified by the Artisan filter, uses static Filter elements with Solid Vinyl crossflow vertical discs mounted between.
|
|
|
|
|
|
|
Copyright © 2006 home-wood-flooring.com. All rights reserved. |
|
